EXPERIMENTAL STUDY OF CHLORIDE TRANSPORT INTO DOUBLE LAYERED COMPONENTS WITH CONCRETE AND RENDERING MORTAR

Authors

  • Raphaele Malheiro Minho University Guimarães (Portugal). Civil Engineering Department.
  • Gibson Rocha Meira Federal University of Paraíba (Brazil). Civil and Environmental Engineering Postgraduate Programme.
  • Munique Lima Federal Institute of Education, Science and Technology (Brazil). Civil Engineering Department.

Keywords:

Concrete, mortar, rendering, chloride, protection

Abstract

This work studied the influence of rendering mortar layer on chloride transport into concrete structures. Concrete specimens rendered with three
different mortar mixtures and two rendering thickness were used. Five of the six faces of the specimens were coated with epoxy resin to simulate
unidirectional flux. The specimens were subjected to weekly wetting and drying cycles in a sodium chloride solution for 49 days. At the end, total
chloride profiles were obtained. Results show that rendering mortars influence chloride transport into concrete and this is more accentuated for
less porous mortars and with higher cement content. There is also a chloride accumulation close to the interface mortar-concrete region, which is
explained by the differences on chloride transport ability between mortar and concrete. Although mortars are more porous than concrete, they can
represent an additional protection against chloride penetration into concrete.

Downloads

Download data is not yet available.

Downloads

Published

2016-12-31

How to Cite

Malheiro, R., Rocha Meira, G., & Lima, M. (2016). EXPERIMENTAL STUDY OF CHLORIDE TRANSPORT INTO DOUBLE LAYERED COMPONENTS WITH CONCRETE AND RENDERING MORTAR. Revista De La Construcción. Journal of Construction, 15(3), 119–132. Retrieved from https://revistaingenieriaconstruccion.uc.cl/index.php/RDLC/article/view/12500